Professional Grade.
Field Tested.

Double ZigZag metal-bond diamond grinding shoes for fast coating removal & coarse concrete grinding. Redi-Lock fit. Soft/Medium/Hard bond, 30/40 & 60/80 grit.

Turbo Ceramic transitional diamond pad bridges metal grinding to resin polishing. Removes metal scratches fast, stays cool. 3in, 50-200 grit, wet or dry, up to 1600 RPM.

PolarShine 12mm resin-bond polishing pad, 50-3000 grit. Aggressive at 50/100/200 for metal scratches, high gloss from 800 up. 3in & 4in. Won't burn under load.

2 Bar metal-bond trapezoid grinding shoe for heavy concrete grinding, leveling & coating removal to 1mm. Wet or dry, 300-600 RPM. 5 bonds, 16/20-120/150 grit

Aggressive ceramic hybrid bond pads cut fast, remove deep metal scratches & bridge metal to resin. Longer life, runs cool dry

Most Shiny White dry diamond polishing pads won't stain concrete

Spinner hybrid ceramic puck bridges metal bond grinding to resin polishing. 8 radial triangle segments, 6 mm channels, 10 mm segment. 3in, 30-200 grit, wet or dry.

Slurry, dust, and debris don't stand a chance. Three AMETEK motors. 330 CFM of suction. A 30-gallon removable tank built for the real volume of a commercial grinding job.

The largest machine in the Zion scrubber lineup. Up to 9,850 sq ft per hour. 69-gallon fresh water tank. Staggered dual-brush design that leaves zero gap on every pass.

Grinder. Scrubber. Polisher. One machine. Every attachment included. Plug into any standard outlet and get to work.

The machine the big grinders can't replace. When floors meet walls, columns, thresholds, and tight corners — the FLINT 10 is where flawless finishes are won or lost.

Two-stage filtration. Toray polyester pre-filter. H12 HEPA cartridge. 99.5% capture at 0.3 micron. Built for continuous operation in the heaviest dust environments.

Ride-on scrubbing power in a nimble 34-inch footprint. 4.5–5 hour runtime on a single charge. Staggered dual brushes, adjustable leather seat, and a 20-year build rating.

More power than the FLINT 10. A flexible head that adapts to any surface angle. Built for demanding edge and small-area work where both reach and raw performance are non-negotiable.

Everything in the FLUX V113 — plus a cyclone pre-separator that intercepts 95% of dust before it reaches the main filter. Less wear. Lower maintenance. Longer service life.

Walk-behind scrubbing productivity for floors where ride-ons can't go. Floating aluminum alloy brush plate. Imported Linatex squeegee. 20-year construction standard.

The industrial flagship of the Zion vacuum lineup. 220V power. 26-gallon collection tank. HEPA filtration. Built for the largest concrete grinding and industrial job sites.

Wash, mop, and vacuum in a single pass — in a machine that weighs 43 pounds and navigates anywhere. Dual counter-rotating BLDC brushes. Seven cleaning modes.

Four heads. Twenty-five inches of grinding width. One machine built to outlast the job site and your competition.

Nine heads. Full 360° planetary motion. Variable speed from zero to 1,800 RPM. Built to eliminate scratch marks, strip coatings, and deliver mirror-grade polish.

1,014 pounds of precision-engineered grinding force. 15HP planetary power. 27 inches of working width. When the job demands a machine that won't flinch — this is it.